Male Fixed Rose
|
|||
|
|
|
|
|
| Remove any existing flow restrictor |
Install the Oxijet™ and ensure the seal is attached between fittings |
Ready to use. | |
|
1) Unscrew rose from the stem. 2) Ensure there is no lime and calcium build up in the rose. Any restrictor after the Oxijet™ will reduce its effectiveness. Restrictors may include limescale, or simply restriction in the shower head or handpiece itself. *To remove lime and calcium build up: Soak rose in a water and white vinegar solution. 3) Remove any flow restrictors from the rose. 4) Ensure there is no flow restrictor built into the rose. NB: If this can't be removed, your Oxijet™ may not aerate to its full potential. 5) Screw the blue Oxijet™ into the rose. The water flow should flow in the same direction as the arrow on the Oxijet™. Ensure any washer supplied is in place before securing the Oxijet™. 6) Screw the Oxijet™ and rose into the stem. |
|||
|
Note: The Oxijet™ is optimised for Felton fixed shower roses. Only use with non-restrictive (all pressures) fixed roses. Compatible with DN15 (1/2") threads and may not be compatible with some fixed roses. Operating pressures : Minimum 300 kPa | Maximum 1000 kPa Operating temperature : Maximum 80°C |
|||
