Shower Handpiece
Instructions:

1) Unscrew handpiece from the hose.

2) Ensure there is no lime and calcium build up in the handpiece. Any restrictor after the Oxijet™ will reduce its effectiveness. Restrictors may include lime scale, or simply restriction in the handpiece or shower head itself.* To remove lime and calcium build up: Soak handpiece in a water and white vinegar solution.

3) Remove any flow restrictors between hose and handpiece, or hose and wall elbow.

4) Ensure there is no flow restrictor built into the handpiece.NB: If this can't be removed, your Oxijet™ may not aerate to its full potential.

5) Screw the yellow Oxijet™ into the handpiece. The water flow should flow in the same direction as the arrow on the Oxijet™. Ensure any washer supplied is in place before securing the Oxijet™.

6) With the hose washer left inside the hose, screw the Oxijet™ and handpiece into the hose.